Made from Recycled Materials
QUIETFLOOR Premium+ (Part Code A111)
This is a superb acoustic floor system designed to reduce both the impact and airborne noise transfer through floors. Adapted from an industrial product that was originally designed to greatly reduce the sound transfer of plant machinery noise through floors.
The laminated composition provides maximum performance for minimum thickness and combines excellent sound insulation with all the qualities of a good carpet underlay. It is quick and easy to install and is easily cut and shaped. Overall thickness is just 15mm so it minimises the increase in floor level.
This product comprises a 10mm layer of chipfoam bonded between 2 layers of 7.5kg/m² mineral loaded acoustic barrier matting. The base layer of barrier mat seals and damps the sound coming through the floor, the isolated top layer of soundproofing mat blocks the sound both ways and the chipfoam core dramatically reduces impact noise transfer.
This product also gives superb performance when used as floating floor isolation under a T&G chipboard wooden topfloor.
Impact Acoustic Performance
Airborne Acoustic Performance
Before laying quietfloor you should examine the existing floorboards and firmly secure any that are loose. It would also be wise to replace any sections that are damaged or broken. It can also be beneficial to seal the gaps between the floorboards and overlay with Tecsound Acoustic Membrane for improved performance first.
Quiet-Floor can be simply laid, or bonded, to the floor. It is essential that the sheets are laid in a staggered, brick type pattern, and that they are butted tightly up together. and up to the perimeters of the room. Due to the 15mm thickness its best to first run a 9mm thick timber batten, the same width as the grippers (about 25-30mm wide), around the room perimeter. The grippers can then be nailed into this raised batten.
|GENERAL PHYSICAL DATA|
|Sheet Size-||1200mm x 600mm|
|Foam||(FMVSS 302) - Self-Extinguishing|
|Barrier||(FMVSS 302) - Self-Extinguishing|
All information contained in these details is given in good faith but without warranty.
|©Custom Audio Designs 2010|