| Each sheet made from 22% recycled material|
Zero ODP and Zero GWP
FIRE-SAFE ACOUSTIC MINERAL WOOL is particularly useful as a sound absorbing infill for the reduction of airborne noise in partition walls, between flooring joists and suspended ceilings.
The density of this material is generally at least twice that of standard loft insulation so it's much more efficient at absorbing sound. The mass of fibreglass loft insulation is generally only around 20Kg/m³.
AMW consists mainly of silicon-oxide together with a number of other metallic oxides. It is non-flammable and chemically inert and is not adversely affected by any substance it may come into contact with. Random arrangement of fibres ensures no water penetration in any direction. It is rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, moulds or bacteria. It will not react with wired plastic or metal wall ties, brickwork or masonry.
AMW, when used in a standard studwall, or between floors, can increase the sound insulation performance by 3-5dB.
Our Spray Adhesive is ideal for sticking these slabs to walls and ceilings.
Supplied in two density grades:
Our 60kg/m³ is the premium acoustic grade version. This offers the best acoustic absorption due to it's specific density.
Our 45kg/m³ is a standard lesser performing lighter version.
If you want to upgrade a ceiling to 1 hour fire resistance without adding any extra plasterboard below then you can use our chicken type wire mesh to hold the mineral wool between the joists to meet
this requirement. The combination of the secured mineral wool sitting on the wire mesh, and the existing ceiling, is usually accepted by Building Control as being in compliance with the required fire resistance of a separating floor between flats.
Usually the material is friction fitted tight between the joists so you won't need any if working from above. However it is sometimes useful to use it if working from below to prevent the material dropping back down before the plasterboard and bars are fitted.
Rolls are supplied in 1.05m wide x 50m long (52m²). The hexagonal holes are 31mm, so its an extra strong version, and the wire gauge is 19 which is 0.92mm thick wire.
GENERAL PHYSICAL DATA
|Flammability BS476 Part 4 (1970)||Non-combustible|
|Acoustic Performance||AMW typically provides a reduction in reverberant noise levels of up to 10dB when fitted under roof constructions.|
We also supply acoustic mineral wool in a wide range of other thicknesses and densities:-
Thicknesses of 30,40,50,60,75 and 100mm are available.
Densities of 33Kg/m³, 45Kg/m³, 60Kg/m³, 80Kg/m³, 100Kg/m³, 140Kg/m³ and 200Kg/m³ are also available for specialist applications.
All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
Prices do not include vat or delivery.
|©Custom Audio Designs 2006-2008|